Pendekatan Thread Untuk Reduksi Delay Pada Perangkat Lunak Kendali Ventilator

Sanga Lawalata(1*), Bambang Lareno(2), Hendrik S. Sugiarto(3),

(1) Institut Teknologi Calvin
(2) Institut Teknologi Calvin
(3) Institut Teknologi Calvin
(*) Corresponding Author

Abstract


The ventilator must be able to supply oxygen according to the duration and amount required, not more or less. To produce the expected oxygen levels, air pressure and air flow, all these stages and processes are controlled electronically through software. However, in its development, the software to control ventilator often encounter delay problems. One of them is related to the work of the alarm. Therefore, futher investigation is needed to reduce the delay. In this research, thread concept approach is proposed.  In this approach, the synchronous process is pushed to an asynchronous thread with a non-blocking process, in which the main running process is not blocked. As a result, the delay time decreased significantly, by 98.24% on the average value

Full Text:

PDF

References


Yuan, L., “Chapter 13: Troubleshooting and Error Reporting”, Medical Ventilator System Basics: A clinical guide, Oxford University Press, Oxford, 2017.

Beloncle, F., Piquilloud L., Olivier, P.Y., Vuillermoz, A., Yvin, E. and Richard, A. M. &. J.-C., “Accuracy of P0.1 measurement performed by ICU ventilators: a bench study”, Annals of Intensive Care, vol. 9, no. 104, pp. 135-143, 2019.

Savary, D., Lesimple, A., Beloncle, F., Morin F., Templier, F., Broc,

A., Brochard, L., Richard, J. and Mercat, A., “Reliability and limits of transport-ventilators to safely ventilate severe patients in special surge situations”, Annals of Intensive Care, vol. 10, no. 1, 2020.

BRIN, “Siaran Pers No. 117SP/HM/BKKP/VIII/2020”, Badan Riset dan Inovasi nasional, Jakarta, 2020.

Kreit, J.W., “Chapter 5: Ventilator Modes and Breath Types”, in Mechanical Ventilation: Physiology and Practice, 2nd ed., Oxford University Press, Oxford, 2017.

Yuan, L., “Chapter 9: Ventilator Control Parameters”, Medical Ventilator System Basics: A clinical guide, Oxford University Press, Oxford, 2017.

Walsh, B.K. and Waugh, J.B., “Alarm Strategies and Surveillance for Mechanical Ventilation”, Respiratory Care, vol. 65, no. 6, pp. 820-831, 2020.

Sugiyono, “Metode penelitian: Kuantitatif, Kualitatif dan R&D”, Penerbit Alfabeta, Bandung, 2018.

Joy-IT, “KY-040 Rotary encoder”, Neukirchen-Vluyn, Joy-IT Published under CC BY-NC-SA 3.0, German, 2017.

Silberschatz, A., Galvin, P.B., and G. Gagne, G., “Operating System Concepts”, 10th Ed., John Wiley & Sons, 2018.

Selvamuthu, D. and Das, D., “Introduction to Statistical Methods, Design of Experiments and Statistical Quality Control”, Springer Nature Singapore, 2018.




DOI: http://dx.doi.org/10.30645/j-sakti.v6i2.519

Refbacks

  • There are currently no refbacks.


J-SAKTI (Jurnal Sains Komputer & Informatika)
Published Papers Indexed/Abstracted By:

Jumlah Kunjungan :

View My Stats